BDRYV - VV-G-632A;GENERAL PURPOSE GREASE;CODE:1150
- MSDS: BDRYV
- Manufacturer: SULFLO INC
- Product Name: VV-G-632A;GENERAL PURPOSE GREASE;CODE:1150
- National Stock Number: 9150-00-273-2374
Product Identification
Product ID:VV-G-632A;GENERAL PURPOSE GREASE;CODE:1150
MSDS Date:06/01/1988
FSC:9150
NIIN:00-273-2374
MSDS Number: BDRYV
Responsible Party
NORTH TONAWANDA, NY 14120-3507
US
Emergency Phone: 716-695-3585
Info Phone: 716-695-3585
Preparer: THOMAS G. MUSILLI
Cage: KO495
Contractor
Telephone: 716-695-3585
Cage: KO495
Ingredients
CALCIUM STEARATE
CAS: 1592-23-0
RTECS: WI3000000
Fraction By Weight: 14.0%
MINERAL OIL
CAS: 64742-52-5
RTECS: PY8035000
Fraction By Weight: 85.0%
OSHA PEL 5MG/CUM,AS OIL MIST
ACGIH TLV: 5MG/CUM,AS OIL MIST
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 1.0%
Hazards
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Explanation of Carcinogenicity:PER MSDS DATA
Effects of Overexposure:NO ILL EFECTS.HOWEVER THIS PRODUCT MAY CAUSE
SKIN OR EYE IRRITATION ON PROLONGED CONTACT.
Medical Cond Aggravated by Exposure:NO DATA PER MSDS.
First Aid
First Aid:EYES:FLUSH WITH PLENTY OF WATER FOR ABOUT 15-20 MINUTES;SEEK
MEDICAL HELP.SKIN:WASH WITH PLENTY OF WATER USING SOAP.
INGESTION:DO NOT INDUCE VOMITING;SEEK MEDICAL HELP.
Fire Fighting
Flash Point Method:COC
Flash Point:380F/193C
Autoignition Temp:Autoignition Temp Text:420F
Lower Limits:UNKN
Upper Limits:UNKN
Extinguishing Media:FOAM,DRY CHEMICAL-CO*2,SAND-FOG
Fire Fighting Procedures:TREAT REFINED MINERAL OIL
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:ABSORB IN SAND OR IN OIL SORBENT AND RECOVER
IT INTO A CONTAINER.
Handling
Handling and Storage Precautions:USE NORMAL PRECAUTIONS DURING
HANDLING.
Other Precautions:AVOID SKIN AND EYE CONTACT.
Exposure Controls
Respiratory Protection:NO SPECIAL REQMNTS UNDER ORDINARY
CONDITIONS/ADEQUATE VENT.
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:OIL RESISTANT
Eye Protection:GOGGLES WITH FACE SHIELD
Other Protective Equipment:AS REQUIRED TO PREVENT PROLONGED CONTACT.
Work Hygienic Practices:AVOID CONTACT WITH EYES AND SKIN;WASH
THOROUGHLY AFTER EACH USE.
Supplemental Safety and Health
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:700F/371C
Melt/Freeze Pt:M.P/F.P Text:210F
Vapor Pres:.01
Vapor Density:0.0
Spec Gravity:0.9
Evaporation Rate & Reference:0.01
Solubility in Water:NEGLIGILE
Appearance and Odor:SEMI-SOLID BUTTERY LUBRICATING GREASE-BLAND
Percent Volatiles by Volume:0.0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NOT SPECIFIED BY THE MFR.
Hazardous Decomposition Products:CO AND CO*2 IN CASE OF INCOMPLETE
COMBUSTION.
Disposal
Waste Disposal Methods:INCINERATE OR DISPOSE IN ACCORDANCE WITH
LOCAL,STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.